Cooking Line
Commercial Ovens
Specialty Equipment
Glass Merchandisers
Kitchen REFRIGERATORS
Reach-in Units
Stainless Wortop Tables
Work Center Tables
Stainless Shelving
Commercial Sinks
Dishware washers
Faucets and More
Dough Preparation
Commercial Pizza Ovens
Bake deck Ovens
Cutting and Blending
Meat Preparation
Restaurant Table Tops
Restaurant Seating
Hot Food Carriers
Folding Tables & Chairs
208V Electric floor fryer item: 47331
- Stainless steel frying pot
- Stainless steel front and galvanized sides
- 40 lb. capacity
- On/off power switch
- 14kW flat heating element for best heat transfer
- Deep cold zone with forward sloping bottom
- Oil draining extension
- POWER (kW): 12 kW AMPS: 50 Amps CAPACITY: 40 lb. NUMBER OF FRY BASKETS INCLUDED: 2 FRY BASKET SIZE: 6.5" x 12.24" x 6" ELECTRICAL: 208V / 60Hz / 3Ph DIMENSIONS (DWH): 27.2" x 15.7" x 44" WEIGHT: 123.5 lbs.
240V Electric floor fryer item: 44591
- Stainless steel frying pot
- Stainless steel front and galvanized sides
- 40 lb. capacity
- On/off power switch
- 14kW flat heating element for best heat transfer
- Deep cold zone with forward sloping bottom
- Oil draining extension
- POWER (kW): 14 kW AMPS: 50 Amps CAPACITY: 40 lb. NUMBER OF FRY BASKETS INCLUDED: 2 FRY BASKET SIZE: 6.5" x 12.24" x 6" ELECTRICAL: 240V / 60Hz / 3Ph DIMENSIONS: L40 X W24 X H48 WEIGHT: 146 lbs.
Atosa MBF8501 – 27″ Reach In Freezer – 1 Door – Bottom Mount Compressor
ID: 3672
Brand: Atosa Refrigeration
Standard Features:
- Bottom mount compressor units with environmentally friendly R290 refrigerant
- Stainless steel exterior & interior
- Dixell digital controller
- Maintains temperatures between -8°F – 0°F
- LED interior light(s)
- Recessed door handle(s)
- Door lock(s) standard
- Magnetic door gasket(s) standard for positive door seal
- Pre-installed casters
- Three(3) pre-installed shelves per section
- Down duct refrigeration to ensure even distribution of air
Optional Features:
- Extra shelves – includes 4 shelf clips per shelf
- MBF8503GR shelf part #: W0402387
- Major Canadian Cities Only!
IKON IGF-35/40 Natural Gas Floor Fryer Full Pot Double Basket 35-40 lb
• The Ikon Gas Fryer line has a tube heat exchange design that incorporates fast temperature recovery and large cold zone.
• Stainless steel fry tanks are completely pressure blasted (peened) for smoother finish and easy cleaning.
• 30,000 BTU / burner
• Models: 3, 4, & 5 tube
• Millivolt (snap action) thermostat, 200°F - 400°F
• Stainless steel front and door
• Sides and back are galvanized steel
• Large cold zone to trap food particles
• 1-1/4” dia. full port drain valve for fast and complete oil draining
• Four 5" casters standard, adjustable stainless steel legs optional*
• Tank is fully peened for smoother welds & easy cleaning
• Drain pipe holder attached to inside door
• Twin nickel plated baskets
• Superior construction, finish, & appearance
• Available in Natural gas(NG) or Liquid Propane(LP)
*Adjustable legs come as a set of four (4) [Part # 119-0020(4)]
IKON IGF-35/40 Propane Floor Fryer Full Pot Double Basket 35-40 lb
• The Ikon Gas Fryer line has a tube heat exchange design that incorporates fast temperature recovery and large cold zone.
• Stainless steel fry tanks are completely pressure blasted (peened) for smoother finish and easy cleaning.
• 30,000 BTU / burner
• Models: 3, 4, & 5 tube
• Millivolt (snap action) thermostat, 200°F - 400°F
• Stainless steel front and door
• Sides and back are galvanized steel
• Large cold zone to trap food particles
• 1-1/4” dia. full port drain valve for fast and complete oil draining
• Four 5" casters standard, adjustable stainless steel legs optional*
• Tank is fully peened for smoother welds & easy cleaning
• Drain pipe holder attached to inside door
• Twin nickel plated baskets
• Superior construction, finish, & appearance
• Available in Natural gas(NG) or Liquid Propane(LP)
*Adjustable legs come as a set of four (4) [Part # 119-0020(4)]
IKON IGF-40/40 Natural Gas Fryer 2 set individual gas control system for 2 split tanks
• The Ikon Gas Fryer line has a tube heat exchange design that incorporates fast temperature recovery and large cold zone.
• 30,000 BTU / burner
• Models: 4 tubes, 2 split tanks.
• 2 set individual gas control system for 2 split tanks.
• Millivolt (snap action) thermostat, 200°F ‐ 400°F
• Stainless steel front and door
• Sides and back are galvanized steel
• Large cold zone to trap food particles
• 1‐1/4” dia full port drain valve for fast and complete oil draining
• Four 5" casters standard, adjustable stainless steel legs optional*
• Tank is fully peened for smoother welds & easy cleaning
• Drain pipe holder attached to inside door
• Twin nickel plated baskets
*Adjustable legs come as a set of four (4) [Part # 119-0020(4)]
IKON IGF-40/40 Propane Fryer 2 set individual gas control system for 2 split tanks
• The Ikon Gas Fryer line has a tube heat exchange design that incorporates fast temperature recovery and large cold zone.
• 30,000 BTU / burner
• Models: 4 tubes, 2 split tanks.
• 2 set individual gas control system for 2 split tanks.
• Millivolt (snap action) thermostat, 200°F ‐ 400°F
• Stainless steel front and door
• Sides and back are galvanized steel
• Large cold zone to trap food particles
• 1‐1/4” dia full port drain valve for fast and complete oil draining
• Four 5" casters standard, adjustable stainless steel legs optional*
• Tank is fully peened for smoother welds & easy cleaning
• Drain pipe holder attached to inside door
• Twin nickel plated baskets
*Adjustable legs come as a set of four (4) [Part # 119-0020(4)]
IKON IGF-40/50 Natural Gas Floor Fryer Full Pot Double Basket 40-50 lb
• The Ikon Gas Fryer line has a tube heat exchange design that incorporates fast temperature recovery and large cold zone.
• Stainless steel fry tanks are completely pressure blasted (peened) for smoother finish and easy cleaning.
• 30,000 BTU / burner
• Models: 3, 4, & 5 tube
• Millivolt (snap action) thermostat, 200°F - 400°F
• Stainless steel front and door
• Sides and back are galvanized steel
• Large cold zone to trap food particles
• 1-1/4” dia. full port drain valve for fast and complete oil draining
• Four 5" casters standard, adjustable stainless steel legs optional*
• Tank is fully peened for smoother welds & easy cleaning
• Drain pipe holder attached to inside door
• Twin nickel plated baskets
• Superior construction, finish, & appearance
• Available in Natural gas(NG) or Liquid Propane(LP)
*Adjustable legs come as a set of four (4) [Part # 119-0020(4)]
IKON IGF-40/50 Propane Floor Fryer Full Pot Double Basket 40-50 lb
• The Ikon Gas Fryer line has a tube heat exchange design that incorporates fast temperature recovery and large cold zone.
• Stainless steel fry tanks are completely pressure blasted (peened) for smoother finish and easy cleaning.
• 30,000 BTU / burner
• Models: 3, 4, & 5 tube
• Millivolt (snap action) thermostat, 200°F - 400°F
• Stainless steel front and door
• Sides and back are galvanized steel
• Large cold zone to trap food particles
• 1-1/4” dia. full port drain valve for fast and complete oil draining
• Four 5" casters standard, adjustable stainless steel legs optional*
• Tank is fully peened for smoother welds & easy cleaning
• Drain pipe holder attached to inside door
• Twin nickel plated baskets
• Superior construction, finish, & appearance
• Available in Natural gas(NG) or Liquid Propane(LP)
*Adjustable legs come as a set of four (4) [Part # 119-0020(4)]
IKON IGF-75/80 Natural Gas Floor Fryer Full Pot Double Basket 75-80 lb
• The Ikon Gas Fryer line has a tube heat exchange design that incorporates fast temperature recovery and large cold zone.
• Stainless steel fry tanks are completely pressure blasted (peened) for smoother finish and easy cleaning.
• 30,000 BTU / burner
• Models: 3, 4, & 5 tube
• Millivolt (snap action) thermostat, 200°F - 400°F
• Stainless steel front and door
• Sides and back are galvanized steel
• Large cold zone to trap food particles
• 1-1/4” dia. full port drain valve for fast and complete oil draining
• Four 5" casters standard, adjustable stainless steel legs optional*
• Tank is fully peened for smoother welds & easy cleaning
• Drain pipe holder attached to inside door
• Twin nickel plated baskets
• Superior construction, finish, & appearance
• Available in Natural gas(NG) or Liquid Propane(LP)
*Adjustable legs come as a set of four (4) [Part # 119-0020(4)]
IKON IGF-75/80 Propane Floor Fryer Full Pot Double Basket 75-80 lb
• The Ikon Gas Fryer line has a tube heat exchange design that incorporates fast temperature recovery and large cold zone.
• Stainless steel fry tanks are completely pressure blasted (peened) for smoother finish and easy cleaning.
• 30,000 BTU / burner
• Models: 3, 4, & 5 tube
• Millivolt (snap action) thermostat, 200°F - 400°F
• Stainless steel front and door
• Sides and back are galvanized steel
• Large cold zone to trap food particles
• 1-1/4” dia. full port drain valve for fast and complete oil draining
• Four 5" casters standard, adjustable stainless steel legs optional*
• Tank is fully peened for smoother welds & easy cleaning
• Drain pipe holder attached to inside door
• Twin nickel plated baskets
• Superior construction, finish, & appearance
• Available in Natural gas(NG) or Liquid Propane(LP)
*Adjustable legs come as a set of four (4) [Part # 119-0020(4)]
LP46 Pressure Fryer
Winston’s Collectramatic LP46 Pressure Fryer features an 8-channel processor control and a patented cold zone to prevent cracklings from scorching and tainting your shortening. It allows up to 360 lbs. of chicken (or equivalent product) to be cooked between filtrations. The LP46 has a 4-head capacity (or 14 lbs of food product) and holds 64 lbs of shortening.
| Category: | High Efficiency Pressure Fryer |
| Size: | 61″ (open) x 20.2″ x 30″ |
| Capacity: | 4-head 14 Lbs product 64 lbs Cooking Oil |
| Ship Weight: | 190 Lbs/86 Kg |
| Circuit Amps | 50 (3 Phase/208V) 50 (3 Phase/240V) 60 (1 Phase/240V) |