Cooking Line
Stainless Shelving
Restaurant Table Tops
Canplas 3915A02 Grease Interceptor
Product Overview
Canplas grease management
Certification
- 15 GPM flow rate
- Heavy-duty engineered thermoplastic
- 30 lb grease capacity
- Flexible installation
- 2" connection
Standard Features:
- Injection molded tank ,lid and baffels in engineered thermoplastic, that will not corrode, chip or peel, even under the most severe applications.
- Enhanced performance, smaller footprint and no ribs where tank meets floor – easy to clean.
- Maximum service temperature rated at (220F) +104C.
- Molded one piece tank eliminates seams and potential leaking.
- Weighs up to 60% less than directly equivalent metal competitors – offers ease of installation, transport and storage.
- Connected using mechanical joint couplings allowing for use of various piping materials.
- Endura® lids supports 440 pounds of pedestrian and light duty traffic.
- Flexibility of installation – can be installed in-floor, on-floor, or semi-recessed.
- Recessed silicone seal prevents unpleasant orders from leaving the interceptor.
- Cover is provided with an easy open latch system.
 
- 10 Year Limited Manufacturers Warranty
Specification Sheet
Product Specifications
Canplas 3920A02 Grease Interceptor
Product Overview
Canplas grease management
Certification
- 20 GPM flow rate
- Heavy-duty engineered thermoplastic
- 40 lb grease capacity
- Flexible installation
- 2" connection
Standard Features:
- Injection molded tank ,lid and baffels in engineered thermoplastic, that will not corrode, chip or peel, even under the most severe applications.
- Enhanced performance, smaller footprint and no ribs where tank meets floor – easy to clean.
- Maximum service temperature rated at (220F) +104C.
- Molded one piece tank eliminates seams and potential leaking.
- Weighs up to 60% less than directly equivalent metal competitors – offers ease of installation, transport and storage.
- Connected using mechanical joint couplings allowing for use of various piping materials.
- Endura® lids supports 440 pounds of pedestrian and light duty traffic.
- Flexibility of installation – can be installed in-floor, on-floor, or semi-recessed.
- Recessed silicone seal prevents unpleasant orders from leaving the interceptor.
- Cover is provided with an easy open latch system.
Â
- 10 Year Limited Manufacturers Warranty
Specification Sheet
Product Specifications
Canplas 3925A02LO Grease Interceptor
Product Overview
Canplas grease management
Certification
- 25 GPM flow rate
- Heavy-duty engineered thermoplastic
- 50 lb grease capacity
- Flexible installation
- 2" connection
Standard Features:
- Injection molded tank ,lid and baffels in engineered thermoplastic, that will not corrode, chip or peel, even under the most severe applications.
- Enhanced performance, smaller footprint and no ribs where tank meets floor – easy to clean.
- Maximum service temperature rated at (220F) +104C.
- Molded one piece tank eliminates seams and potential leaking.
- Weighs up to 60% less than directly equivalent metal competitors – offers ease of installation, transport and storage.
- Connected using mechanical joint couplings allowing for use of various piping materials.
- Endura® lids supports 440 pounds of pedestrian and light duty traffic.
- Flexibility of installation – can be installed in-floor, on-floor, or semi-recessed.
- Recessed silicone seal prevents unpleasant orders from leaving the interceptor.
- Cover is provided with an easy open latch system.
Â
- 10 Year Limited Manufacturers Warranty
Specification Sheet
Product Specifications
Canplas 3925XTA03 Grease Interceptor
Product Overview
Canplas grease management
Certification
- 25 GPM flow rate
- Heavy-duty engineered thermoplastic
- 50 lb grease capacity
- Flexible installation
- 3" connection
Standard Features:
- Injection molded tank ,lid and baffels in engineered thermoplastic, that will not corrode, chip or peel, even under the most severe applications.
- Enhanced performance, smaller footprint and no ribs where tank meets floor – easy to clean.
- Maximum service temperature rated at (220F) +104C.
- Molded one piece tank eliminates seams and potential leaking.
- Weighs up to 60% less than directly equivalent metal competitors – offers ease of installation, transport and storage.
- Connected using mechanical joint couplings allowing for use of various piping materials.
- Endura® lids supports 440 pounds of pedestrian and light duty traffic.
- Flexibility of installation – can be installed in-floor, on-floor, or semi-recessed.
- Recessed silicone seal prevents unpleasant orders from leaving the interceptor.
- Cover is provided with an easy open latch system.
Â
- 10 Year Limited Manufacturers Warranty
Specification Sheet
Product Specifications
Canplas 3935A03 Grease Interceptor
Product Overview
Canplas grease management
Certification
- 35 GPM flow rate
- Heavy-duty engineered thermoplastic
- 70 lb grease capacity
- Flexible installation
- 3" connection
Standard Features:
- Injection molded tank ,lid and baffels in engineered thermoplastic, that will not corrode, chip or peel, even under the most severe applications.
- Enhanced performance, smaller footprint and no ribs where tank meets floor – easy to clean.
- Maximum service temperature rated at (220F) +104C.
- Molded one piece tank eliminates seams and potential leaking.
- Weighs up to 60% less than directly equivalent metal competitors – offers ease of installation, transport and storage.
- Connected using mechanical joint couplings allowing for use of various piping materials.
- Endura® lids supports 440 pounds of pedestrian and light duty traffic.
- Flexibility of installation – can be installed in-floor, on-floor, or semi-recessed.
- Recessed silicone seal prevents unpleasant orders from leaving the interceptor.
- Cover is provided with an easy open latch system.
Â
- 10 Year Limited Manufacturers Warranty
Specification Sheet
Product Specifications
Canplas 3935A04 Grease Interceptor
Product Overview
Canplas grease management
Certification
- 35 GPM flow rate
- Heavy-duty engineered thermoplastic
- 70 lb grease capacity
- Flexible installation
- 4" connection
Standard Features:
- Injection molded tank ,lid and baffels in engineered thermoplastic, that will not corrode, chip or peel, even under the most severe applications.
- Enhanced performance, smaller footprint and no ribs where tank meets floor – easy to clean.
- Maximum service temperature rated at (220F) +104C.
- Molded one piece tank eliminates seams and potential leaking.
- Weighs up to 60% less than directly equivalent metal competitors – offers ease of installation, transport and storage.
- Connected using mechanical joint couplings allowing for use of various piping materials.
- Endura® lids supports 440 pounds of pedestrian and light duty traffic.
- Flexibility of installation – can be installed in-floor, on-floor, or semi-recessed.
- Recessed silicone seal prevents unpleasant orders from leaving the interceptor.
- Cover is provided with an easy open latch system.
Â
- 10 Year Limited Manufacturers Warranty
Specification Sheet
Product Specifications
Canplas 3950A03 Grease Interceptor
Product Overview
Canplas grease management
Certification
- 50 GPM flow rate
- Heavy-duty engineered thermoplastic
- 100 lb grease capacity
- Flexible installation
- 3" connection
Standard Features:
- Injection molded tank ,lid and baffels in engineered thermoplastic, that will not corrode, chip or peel, even under the most severe applications.
- Enhanced performance, smaller footprint and no ribs where tank meets floor – easy to clean.
- Maximum service temperature rated at (220F) +104C.
- Molded one piece tank eliminates seams and potential leaking.
- Weighs up to 60% less than directly equivalent metal competitors – offers ease of installation, transport and storage.
- Connected using mechanical joint couplings allowing for use of various piping materials.
- Endura® lids supports 440 pounds of pedestrian and light duty traffic.
- Flexibility of installation – can be installed in-floor, on-floor, or semi-recessed.
- Recessed silicone seal prevents unpleasant orders from leaving the interceptor.
- Cover is provided with an easy open latch system.
Â
- 10 Year Limited Manufacturers Warranty
Specification Sheet
Product Specifications
Canplas 3950A04 Grease Interceptor
Product Overview
Canplas grease management
Certification
- 50 GPM flow rate
- Heavy-duty engineered thermoplastic
- 100 lb grease capacity
- Flexible installation
- 4" connection
Standard Features:
- Injection molded tank ,lid and baffels in engineered thermoplastic, that will not corrode, chip or peel, even under the most severe applications.
- Enhanced performance, smaller footprint and no ribs where tank meets floor – easy to clean.
- Maximum service temperature rated at (220F) +104C.
- Molded one piece tank eliminates seams and potential leaking.
- Weighs up to 60% less than directly equivalent metal competitors – offers ease of installation, transport and storage.
- Connected using mechanical joint couplings allowing for use of various piping materials.
- Endura® lids supports 440 pounds of pedestrian and light duty traffic.
- Flexibility of installation – can be installed in-floor, on-floor, or semi-recessed.
- Recessed silicone seal prevents unpleasant orders from leaving the interceptor.
- Cover is provided with an easy open latch system.
Â
- 10 Year Limited Manufacturers Warranty
Specification Sheet