Showing 1–12 of 35 results

IKON Fryer IGF-40/50 LP

• The Ikon Gas Fryer line has a tube heat exchange design that incorporates fast temperature recovery and large cold zone.
• Stainless steel fry tanks are completely pressure blasted (peened) for smoother finish and easy cleaning.
• 30,000 BTU / burner
• Models: 3, 4, & 5 tube
• Millivolt (snap action) thermostat, 200°F - 400°F
• Stainless steel front and door
• Sides and back are galvanized steel
• Large cold zone to trap food particles
• 1-1/4” dia. full port drain valve for fast and complete oil draining
• Four 5" casters standard, adjustable stainless steel legs optional*
• Tank is fully peened for smoother welds & easy cleaning
• Drain pipe holder attached to inside door
• Twin nickel plated baskets
• Superior construction, finish, & appearance
• Available in Natural gas(NG) or Liquid Propane(LP)
*Adjustable legs come as a set of four (4) [Part # 119-0020(4)]

IKON Griddle IMG-60

• The Ikon Manual Control Griddles are available in 12", 24”, 36”, 48” & 60” widths,  the continous 30,000 BTU output per  burner provides even heat   to the 3/4” thick polished steel griddle plate
• Adjustable manual gas controls provide easy and safe operations
• Pilot light can be lit from the front for ease of use
• “U” shape burners provide even heat distribution every 12”
• 3/4” griddle plate
• 30,000 BTU/ burner
• Gas control knob every 12”
• All stainless steel cabinet
• Double wall insulated sides
• Widths: 12", 24”, 36”, 48”, & 60”
• “Cool-to-the-touch” front s/s edge
• Back and side splash guards fully welded to griddle plate
• Flue located on back of unit for ample ventilation
• Adjustable stainless steel legs, non-skid feet
• Easy to remove 3-1/4” grease drawer with “weep hole” and baffle
• Grease trough is standard 4” spatula width
• Griddle is fully serviceable from the front
• Available in Natural gas(NG) or Liquid propane(LP).
  A conversion kit is supplied with each unit

IKON Griddle ITG-24

•The Ikon Thermostat Control Griddles are available in 24”, 36”, 48” & 60” widths,  the continous 30,000 BTU output per  burner provides even heat to the 1” thick polished steel griddle plate
• Adjustable manual gas controls provide easy and safe operations
• “U” shape burners provide even heat distribution every 12”
• 1” griddle plate
• 30,000 BTU/ burner
• Gas control knob every 12”
• All stainless steel cabinet
• Double wall insulated sides
• Widths: 24”, 36”, 48”, & 60”
• “Cool-to-the-touch” front s/s edge
• Back and side splash guards fully welded to griddle plate
• Flue located on back of unit for ample ventilation
• Adjustable stainless steel legs, non-skid feet
• Easy to remove 3-1/4” grease drawer with “weep hole” and baffle
• Grease trough is standard 4” spatula width
• Griddle is fully serviceable from the front
• Available in Natural gas(NG) or Liquid propane(LP).
  A conversion kit is supplied with each unit

IKON IECO Convection Oven

$4,149.00
• Power 10KW, 208V/60HZ three phase
(cord set not included, must be hardwired)
• 26" legs on single stack unit for easy access
• Electronic Ignition
• Dial type easy to use thermostat
• Temperature range: 150°-500°F ( 66°-260° C)
• Electronic one hour timer with alarm buzzer to alert employees and prevent overcooking
• 2 halogen interior lights, easy to service
• Independent doors with full view windows
• 2-speed, ½ HP fan motor (1725, 1140 rpm) for even heat distribution and Forced ‘cool down’ fan mode
• Exterior stainless front, top and sides
• Porcelain enamel oven interior for easy cleaning
• 5 nickel plated Heavy Duty racks, 11 rack position
• Cooking chamber reduces heat loss and saves energy
• ETL Safety and Sanitation Certified

IKON IECO-2 Convection Oven

$7,799.00
• Power 10KW, 208V/60HZ three phase (cord set not included, must be hardwired) • 26" legs on single stack unit for easy access • Electronic Ignition • Dial type easy to use thermostat • Temperature range: 150°-500°F ( 66°-260° C) • Electronic one hour timer with alarm buzzer to alert employees and prevent overcooking • 2 halogen interior lights, easy to service • Independent doors with full view windows • 2-speed, ½ HP fan motor (1725, 1140 rpm) for even heat distribution and Forced ‘cool down’ fan mode • Exterior stainless front, top and sides • Porcelain enamel oven interior for easy cleaning • 5 nickel plated Heavy Duty racks, 11 rack position • Cooking chamber reduces heat loss and saves energy • ETL Safety and Sanitation Certified

IKON IGCO Single Convection Oven

$4,499.00
• Full size gas convection oven • 3 inshot burners, 18,000 BTU each - total 54,000 BTU • Independent glass window doors • 2-speed, ½ HP fan motor (1725, 1140 rpm) • Forced ‘cool down’ fan mode • Porcelain enamel oven interior • Oven Ready light • Electronic ignition (Fenwal) • Electronic thermostat (FAST) & manual timer control • Temperature range: 150°-500°F ( 66°-260° C) • Stainless steel front, sides, & top exterior • Control panel located on right side, pull down drawer, away from burners • 2 halogen interior lights, easy to service • 5 nickel plated racks, 10 rack positions • Anchor point on rear of oven for restraining cable • Single Oven-requires IGCO Leg Kit (sold separately) • Double Oven-requires two IGCO ovens and IGCO Stacking Kit (sold separately) • Available in Natural gas(NG) or Liquid propane(LP). A conversion kit is supplied with each unit

IKON IGCO-2 Dual Convection Ovens

$8,399.00
• Full size gas convection oven • 3 inshot burners, 18,000 BTU each - total 54,000 BTU • Independent glass window doors • 2-speed, ½ HP fan motor (1725, 1140 rpm) • Forced ‘cool down’ fan mode • Porcelain enamel oven interior • Oven Ready light • Electronic ignition (Fenwal) • Electronic thermostat (FAST) & manual timer control • Temperature range: 150°-500°F ( 66°-260° C) • Stainless steel front, sides, & top exterior • Control panel located on right side, pull down drawer, away from burners • 2 halogen interior lights, easy to service • 5 nickel plated racks, 10 rack positions • Anchor point on rear of oven for restraining cable • Single Oven-requires IGCO Leg Kit (sold separately) • Double Oven-requires two IGCO ovens and IGCO Stacking Kit (sold separately) • Available in Natural gas(NG) or Liquid propane(LP). A conversion kit is supplied with each unit

IKON IGF-35/40 LP Fryer

• The Ikon Gas Fryer line has a tube heat exchange design that incorporates fast temperature recovery and large cold zone.
• Stainless steel fry tanks are completely pressure blasted (peened) for smoother finish and easy cleaning.
• 30,000 BTU / burner
• Models: 3, 4, & 5 tube
• Millivolt (snap action) thermostat, 200°F - 400°F
• Stainless steel front and door
• Sides and back are galvanized steel
• Large cold zone to trap food particles
• 1-1/4” dia. full port drain valve for fast and complete oil draining
• Four 5" casters standard, adjustable stainless steel legs optional*
• Tank is fully peened for smoother welds & easy cleaning
• Drain pipe holder attached to inside door
• Twin nickel plated baskets
• Superior construction, finish, & appearance
• Available in Natural gas(NG) or Liquid Propane(LP)
*Adjustable legs come as a set of four (4) [Part # 119-0020(4)]

IKON IGF-35/40 NG Fryer

$1,199.00
• The Ikon Gas Fryer line has a tube heat exchange design that incorporates fast temperature recovery and large cold zone.
• Stainless steel fry tanks are completely pressure blasted (peened) for smoother finish and easy cleaning.
• 30,000 BTU / burner
• Models: 3, 4, & 5 tube
• Millivolt (snap action) thermostat, 200°F - 400°F
• Stainless steel front and door
• Sides and back are galvanized steel
• Large cold zone to trap food particles
• 1-1/4” dia. full port drain valve for fast and complete oil draining
• Four 5" casters standard, adjustable stainless steel legs optional*
• Tank is fully peened for smoother welds & easy cleaning
• Drain pipe holder attached to inside door
• Twin nickel plated baskets
• Superior construction, finish, & appearance
• Available in Natural gas(NG) or Liquid Propane(LP)
*Adjustable legs come as a set of four (4) [Part # 119-0020(4)]

IKON IGF-40/40 LP Split Pot Fryer

• The Ikon Gas Fryer line has a tube heat exchange design that incorporates fast temperature recovery and large cold zone.
• 30,000 BTU / burner
• Models: 4 tubes, 2 split tanks.
• 2 set individual gas control system for 2 split tanks.
• Millivolt (snap action) thermostat, 200°F ‐ 400°F
• Stainless steel front and door
• Sides and back are galvanized steel
• Large cold zone to trap food particles
• 1‐1/4” dia full port drain valve for fast and complete oil draining
• Four 5" casters standard, adjustable stainless steel legs optional*
• Tank is fully peened for smoother welds & easy cleaning
• Drain pipe holder attached to inside door
• Twin nickel plated baskets
*Adjustable legs come as a set of four (4) [Part # 119-0020(4)]

IKON IGF-40/40 NG Fryer

• The Ikon Gas Fryer line has a tube heat exchange design that incorporates fast temperature recovery and large cold zone.
• 30,000 BTU / burner
• Models: 4 tubes, 2 split tanks.
• 2 set individual gas control system for 2 split tanks.
• Millivolt (snap action) thermostat, 200°F ‐ 400°F
• Stainless steel front and door
• Sides and back are galvanized steel
• Large cold zone to trap food particles
• 1‐1/4” dia full port drain valve for fast and complete oil draining
• Four 5" casters standard, adjustable stainless steel legs optional*
• Tank is fully peened for smoother welds & easy cleaning
• Drain pipe holder attached to inside door
• Twin nickel plated baskets
*Adjustable legs come as a set of four (4) [Part # 119-0020(4)]

IKON IGF-40/50 NG Fryer

• The Ikon Gas Fryer line has a tube heat exchange design that incorporates fast temperature recovery and large cold zone.
• Stainless steel fry tanks are completely pressure blasted (peened) for smoother finish and easy cleaning.
• 30,000 BTU / burner
• Models: 3, 4, & 5 tube
• Millivolt (snap action) thermostat, 200°F - 400°F
• Stainless steel front and door
• Sides and back are galvanized steel
• Large cold zone to trap food particles
• 1-1/4” dia. full port drain valve for fast and complete oil draining
• Four 5" casters standard, adjustable stainless steel legs optional*
• Tank is fully peened for smoother welds & easy cleaning
• Drain pipe holder attached to inside door
• Twin nickel plated baskets
• Superior construction, finish, & appearance
• Available in Natural gas(NG) or Liquid Propane(LP)
*Adjustable legs come as a set of four (4) [Part # 119-0020(4)]