EFI SI818-3B – 102″ Three-Compartment Corner-Drain Sink – Left & Right Drainboards

EFI SI818-3B – 102″ Three-Compartment Corner-Drain Sink – Left & Right Drainboards

$1,315.00 $1,052.00
EFI
Add to WishlistCompare

Standard Features

  • 18-gauge Type 304 stainless-steel construction
  • Coved corners and die-stamped surfaces for drainage
  • TIG-welded construction with blended satin-finish seams
  • 3 sink compartments
  • Corner-drain guard, overflow pipe and drain extension included
  • 2 integral drainboards
  • NSF certified
  • Overall dimensions: 102″ W × 23.5″ D × 44.5″ H
Warranty Protection
1-Year Parts & Labor Warranty
CAShips From Canada
CACanadian Support (416) 783-5907
NSF Certified
NSF Certified
Commercial sanitation standard

Why Buy From Us

  • Authorized Commercial Equipment Supplier
  • Fast Shipping Across Canada
  • Support Beyond Checkout
Ask a Question
SKU: EFI SI818-3B
Availability: In Stock Pre order Out of stock
Warewashing Faucets & Sinks • Canada Commercial Sales

Commercial Product Overview

Best for restaurants needing reliable warewashing performance, sanitation confidence, and correct installation fit.
Sized for deliberate back-of-house planning, the EFI SI818-3B is a 102-inch-wide corner-drain compartment sink in 18-gauge Type 304 stainless steel. This three-compartment model combines 3 18 x 18 in. bowls, each 11 in. deep, with drainboards on both sides. It gives buyers a specific combination of bowl capacity and staging space instead of a one-size-fits-all compromise.

Buyers should verify the specifications on this page to confirm dimensions, requirements, and installation compatibility prior to ordering.

Specifications FAQ
Brand: EFIModel: SI818-3BCategory: Warewashing Faucets & Sinks
Commercial Grade Built for Daily Use Canada-Wide Sales
Spec-first confidence: verify fit, requirements, and compatibility before ordering.
Commercial intent: equipment listed for professional foodservice environments.
Ordering tip: match doorway/service access and confirm connections/clearances.
Sanitation Ready

Built for cleaner back-of-house workflow and commercial sanitation routines.

Water / Drain Fit

Drain: 1 7/8 in.

Service Workflow

Designed for dependable use in busy dish rooms and prep areas.

Commercial Build

Durable construction supports long-term professional foodservice use.

Key Specifications

Essential fit, capacity, utility, and certification details.

View all specifications
ModelSI818-3B
Fit CheckW 102 in × D 23.5 in × H 44.5 in
CertificationsNSF Certified
Key Benefits
Decision points for commercial buyers
  • 102-inch overall width and 3-compartment layout identified by model SI818-3B
  • 18-gauge Type 304 stainless steel selected for demanding commercial-kitchen use
  • 3 18 x 18 in. bowls, each 11 in. deep for an easier pre-purchase capacity check
  • Drainboards on both sides support the intended workflow and footprint
  • Corner drain; 8-inch on-centre faucet holes; faucet sold separately
Buying Tips
Reduce ordering risk before checkout
Fit check: Width: 102 in • Depth: 23.5 in • Height: 44.5 in • Weight: 133 lb
For SI818-3B, measure the complete 102-inch footprint and confirm that the intended dirty-to-clean flow is supported by drainboards on both sides. Review the 3 18 x 18 in. bowls, each 11 in. deep, corner drain, backsplash clearance and leg location against your rough-in. Confirm 8-inch on-centre faucet holes; faucet sold separately. Confirm delivery access and have a qualified installer verify local plumbing and public-health requirements before purchase.
Specifications
Commercial Equipment Specifications — Built for Fast, Accurate Buyer Comparison.
Core Product Details
BrandEFI
ModelSI818-3B
CategoryWarewashing Faucets & Sinks
Equipment Type18″ Compartment Corner-Drain Sink
Installation TypeFreestanding; plumbed
Fit & Dimensions
Width102 in
Depth23.5 in
Height44.5 in
Overall Dimensions102″ W × 23.5″ D × 44.5″ H
Overall Dimensions (SI)102″ W × 23.5″ D × 44.5″ H
Net Weight133 lb
Performance & Output
Electrical / Gas Requirements
Drain Size1 7/8 in
Build & Certifications
CertificationsNSF Certified
Additional Specs
Faq answer 1Model SI818-3B is the 102-inch, three-compartment version with drainboards on both sides. Its working section uses 3 18 x 18 in. bowls, each 11 in. deep, so compare the complete footprint rather than bowl size alone.
Faq answer 2SI818-3B includes drainboards on both sides, creating separate landing areas for incoming and outgoing wares. Confirm the full 102-inch footprint and operator flow before ordering.
Faq answer 3For SI818-3B, EFI's published family specifications list 18-gauge Type 304 stainless steel; 3 18 x 18 in. bowls, each 11 in. deep; corner drain; 8-inch on-centre faucet holes; faucet sold separately; coved corners and TIG-welded construction. Have the installer compare the published drawing with the site rough-in before ordering.
Faq answer 4Before the SI818-3B order is approved, confirm its 102-inch overall width, two-drainboard configuration, bowl clearance, faucet centres, drain location, delivery path and service aisle. The installer should review connections and service access while the local authority confirms the plumbing and sanitation requirements for the Canadian site.
Faq question 1What is included in the EFI SI818-3B configuration?
Faq question 2Where is the working or drainboard side on SI818-3B?
Faq question 3What material, drain and faucet details apply to SI818-3B?
Faq question 4What should be confirmed before EFI SI818-3B is released for delivery?
Spec sheethttps://www.efifoodequip.com/upload/admin/users/18_Corner-Drain-Sink.pdf
FinishSatin finish
Material18-gauge Type 304 stainless steel
Buyer note: Ensure your space, connections, and access points match this unit before ordering. Our team can help confirm fit and requirements to prevent installation issues and delays.
Why Buy From Us
Buy with a spec-first approach: Continental Restaurant Equipment can help you confirm the exact EFI model, overall width and drainboard direction, with special attention to SI818-3B's straight-through working direction. As SI818-3B moves toward approval, Canadian pre-purchase support can help confirm bowl dimensions, drain location, faucet centres and drainboard orientation before the purchase is released.

Related Categories

Explore compatible equipment groups and closely related commercial categories.

All Stainless Steel Sinks3-Compartment SinksCommercial FaucetsPre-Rinse FaucetsCommercial Dishwashers

Frequently Asked Questions

What is included in the EFI SI818-3B configuration?
Model SI818-3B is the 102-inch, three-compartment version with drainboards on both sides. Its working section uses 3 18 x 18 in. bowls, each 11 in. deep, so compare the complete footprint rather than bowl size alone.
Where is the working or drainboard side on SI818-3B?
SI818-3B includes drainboards on both sides, creating separate landing areas for incoming and outgoing wares. Confirm the full 102-inch footprint and operator flow before ordering.
What material, drain and faucet details apply to SI818-3B?
For SI818-3B, EFI's published family specifications list 18-gauge Type 304 stainless steel; 3 18 x 18 in. bowls, each 11 in. deep; corner drain; 8-inch on-centre faucet holes; faucet sold separately; coved corners and TIG-welded construction. Have the installer compare the published drawing with the site rough-in before ordering.
What should be confirmed before EFI SI818-3B is released for delivery?
Before the SI818-3B order is approved, confirm its 102-inch overall width, two-drainboard configuration, bowl clearance, faucet centres, drain location, delivery path and service aisle. The installer should review connections and service access while the local authority confirms the plumbing and sanitation requirements for the Canadian site.