EFI SI818-3R – 80.5″ Three-Compartment Corner-Drain Sink – Right Drainboard

EFI SI818-3R – 80.5″ Three-Compartment Corner-Drain Sink – Right Drainboard

$1,150.00 $920.00
EFI
Add to WishlistCompare

Standard Features

  • 18-gauge Type 304 stainless-steel construction
  • Coved corners and die-stamped surfaces for drainage
  • TIG-welded construction with blended satin-finish seams
  • 3 sink compartments
  • Corner-drain guard, overflow pipe and drain extension included
  • 1 integral drainboard
  • NSF certified
  • Overall dimensions: 80.5″ W × 23.5″ D × 44.5″ H
Warranty Protection
1-Year Parts & Labor Warranty
CAShips From Canada
CACanadian Support (416) 783-5907
NSF Certified
NSF Certified
Commercial sanitation standard

Why Buy From Us

  • Authorized Commercial Equipment Supplier
  • Fast Shipping Across Canada
  • Support Beyond Checkout
Ask a Question
SKU: EFI SI818-3R
Availability: In Stock Pre order Out of stock
Warewashing Faucets & Sinks • Canada Commercial Sales

Commercial Product Overview

Best for restaurants needing reliable warewashing performance, sanitation confidence, and correct installation fit.
Sized for deliberate back-of-house planning, the EFI SI818-3R is an 80.5-inch-wide corner-drain compartment sink in 18-gauge Type 304 stainless steel. This three-compartment model combines 3 18 x 18 in. bowls, each 11 in. deep, with a right drainboard. This model is best evaluated as a complete footprint, including its bowl arrangement and landing direction.

Buyers should verify the specifications on this page to confirm dimensions, requirements, and installation compatibility prior to ordering.

Specifications FAQ
Brand: EFIModel: SI818-3RCategory: Warewashing Faucets & Sinks
Commercial Grade Built for Daily Use Canada-Wide Sales
Spec-first confidence: verify fit, requirements, and compatibility before ordering.
Commercial intent: equipment listed for professional foodservice environments.
Ordering tip: match doorway/service access and confirm connections/clearances.
Sanitation Ready

Built for cleaner back-of-house workflow and commercial sanitation routines.

Water / Drain Fit

Drain: 1 7/8 in.

Service Workflow

Designed for dependable use in busy dish rooms and prep areas.

Commercial Build

Durable construction supports long-term professional foodservice use.

Key Specifications

Essential fit, capacity, utility, and certification details.

View all specifications
ModelSI818-3R
Fit CheckW 80.5 in × D 23.5 in × H 44.5 in
CertificationsNSF Certified
Key Benefits
Decision points for commercial buyers
  • 80.5-inch overall width and 3-compartment layout identified by model SI818-3R
  • 18-gauge Type 304 stainless steel selected for demanding commercial-kitchen use
  • 3 18 x 18 in. bowls, each 11 in. deep to support practical capacity planning
  • A right drainboard supports the intended workflow and footprint
  • Corner drain; 8-inch on-centre faucet holes; faucet sold separately
Buying Tips
Reduce ordering risk before checkout
Fit check: Width: 80.5 in • Depth: 23.5 in • Height: 44.5 in • Weight: 121 lb
For SI818-3R, measure the complete 80.5-inch footprint and confirm that the intended dirty-to-clean flow is supported by a right drainboard. Review the 3 18 x 18 in. bowls, each 11 in. deep, corner drain, backsplash clearance and leg location against your rough-in. Confirm 8-inch on-centre faucet holes; faucet sold separately. Confirm delivery access and have a qualified installer verify local plumbing and public-health requirements before purchase.
Specifications
Commercial Equipment Specifications — Built for Fast, Accurate Buyer Comparison.
Core Product Details
BrandEFI
ModelSI818-3R
CategoryWarewashing Faucets & Sinks
Equipment Type18″ Compartment Corner-Drain Sink
Installation TypeFreestanding; plumbed
Fit & Dimensions
Width80.5 in
Depth23.5 in
Height44.5 in
Overall Dimensions80.5″ W × 23.5″ D × 44.5″ H
Overall Dimensions (SI)80.5″ W × 23.5″ D × 44.5″ H
Net Weight121 lb
Performance & Output
Electrical / Gas Requirements
Drain Size1 7/8 in
Build & Certifications
CertificationsNSF Certified
Additional Specs
Faq answer 1Model SI818-3R is the 80.5-inch, three-compartment version with a right drainboard. Its working section uses 3 18 x 18 in. bowls, each 11 in. deep, so compare the complete footprint rather than bowl size alone.
Faq answer 2On SI818-3R, the right drainboard sits to the operator's right when facing the sink. Confirm that orientation against the room plan and the intended dirty-to-clean workflow.
Faq answer 3For SI818-3R, EFI's published family specifications list 18-gauge Type 304 stainless steel; 3 18 x 18 in. bowls, each 11 in. deep; corner drain; 8-inch on-centre faucet holes; faucet sold separately; coved corners and TIG-welded construction. Confirm the current specification sheet before finalizing faucet and drain connections.
Faq answer 4As a final check on SI818-3R, review its 80.5-inch overall width, right-side configuration, bowl clearance, faucet centres, drain location, delivery path and service aisle. Use a qualified installer to validate the rough-in and clearances and confirm the Canadian plumbing and sanitation requirements that apply locally.
Faq question 1What is included in the EFI SI818-3R configuration?
Faq question 2Where is the working or drainboard side on SI818-3R?
Faq question 3What material, drain and faucet details apply to SI818-3R?
Faq question 4How should a Canadian site be reviewed before ordering EFI SI818-3R?
Spec sheethttps://www.efifoodequip.com/upload/admin/users/18_Corner-Drain-Sink.pdf
FinishSatin finish
Material18-gauge Type 304 stainless steel
Buyer note: Ensure your space, connections, and access points match this unit before ordering. Our team can help confirm fit and requirements to prevent installation issues and delays.
Why Buy From Us
Order through Continental Restaurant Equipment when you want support to prepare a cleaner handoff to the plumber, installer or project manager, with special attention to SI818-3R's right-side working direction. For the SI818-3R purchase, a second specification check can help confirm bowl dimensions, drain location, faucet centres and drainboard orientation before the purchase is released.

Related Categories

Explore compatible equipment groups and closely related commercial categories.

All Stainless Steel Sinks3-Compartment SinksCommercial FaucetsPre-Rinse FaucetsCommercial Dishwashers

Frequently Asked Questions

What is included in the EFI SI818-3R configuration?
Model SI818-3R is the 80.5-inch, three-compartment version with a right drainboard. Its working section uses 3 18 x 18 in. bowls, each 11 in. deep, so compare the complete footprint rather than bowl size alone.
Where is the working or drainboard side on SI818-3R?
On SI818-3R, the right drainboard sits to the operator's right when facing the sink. Confirm that orientation against the room plan and the intended dirty-to-clean workflow.
What material, drain and faucet details apply to SI818-3R?
For SI818-3R, EFI's published family specifications list 18-gauge Type 304 stainless steel; 3 18 x 18 in. bowls, each 11 in. deep; corner drain; 8-inch on-centre faucet holes; faucet sold separately; coved corners and TIG-welded construction. Confirm the current specification sheet before finalizing faucet and drain connections.
How should a Canadian site be reviewed before ordering EFI SI818-3R?
As a final check on SI818-3R, review its 80.5-inch overall width, right-side configuration, bowl clearance, faucet centres, drain location, delivery path and service aisle. Use a qualified installer to validate the rough-in and clearances and confirm the Canadian plumbing and sanitation requirements that apply locally.