EFI SI821-2R – 62.5″ Two-Compartment Corner-Drain Sink – Right Drainboard

EFI SI821-2R – 62.5″ Two-Compartment Corner-Drain Sink – Right Drainboard

$1,133.75 $907.00
EFI
Add to WishlistCompare

Standard Features

  • 18-gauge Type 304 stainless-steel construction
  • Coved corners and die-stamped surfaces for drainage
  • TIG-welded construction with blended satin-finish seams
  • 2 sink compartments
  • Corner-drain guard, overflow pipe and drain extension included
  • 1 integral drainboard
  • NSF certified
  • Overall dimensions: 62.5″ W × 26.5″ D × 44.5″ H
Warranty Protection
1-Year Parts & Labor Warranty
CAShips From Canada
CACanadian Support (416) 783-5907
NSF Certified
NSF Certified
Commercial sanitation standard

Why Buy From Us

  • Authorized Commercial Equipment Supplier
  • Fast Shipping Across Canada
  • Support Beyond Checkout
Ask a Question
SKU: EFI SI821-2R
Availability: In Stock Pre order Out of stock
Warewashing Faucets & Sinks • Canada Commercial Sales

Commercial Product Overview

Best for restaurants needing reliable warewashing performance, sanitation confidence, and correct installation fit.
For kitchens balancing sanitation, durability and floor-space discipline, the EFI SI821-2R is a 62.5-inch-wide corner-drain compartment sink in 18-gauge Type 304 stainless steel. This two-compartment model combines 2 18 x 21 in. bowls, each 14 in. deep, with a right drainboard. It gives buyers a specific combination of bowl capacity and staging space instead of a one-size-fits-all compromise.

Buyers should verify the specifications on this page to confirm dimensions, requirements, and installation compatibility prior to ordering.

Specifications FAQ
Brand: EFIModel: SI821-2RCategory: Warewashing Faucets & Sinks
Commercial Grade Built for Daily Use Canada-Wide Sales
Spec-first confidence: verify fit, requirements, and compatibility before ordering.
Commercial intent: equipment listed for professional foodservice environments.
Ordering tip: match doorway/service access and confirm connections/clearances.
Sanitation Ready

Built for cleaner back-of-house workflow and commercial sanitation routines.

Water / Drain Fit

Drain: 1 7/8 in.

Service Workflow

Designed for dependable use in busy dish rooms and prep areas.

Commercial Build

Durable construction supports long-term professional foodservice use.

Key Specifications

Essential fit, capacity, utility, and certification details.

View all specifications
ModelSI821-2R
Fit CheckW 62.5 in × D 26.5 in × H 44.5 in
CertificationsNSF Certified
Key Benefits
Decision points for commercial buyers
  • 62.5-inch overall width and 2-compartment layout identified by model SI821-2R
  • 18-gauge Type 304 stainless steel selected for demanding commercial-kitchen use
  • 2 18 x 21 in. bowls, each 14 in. deep to support practical capacity planning
  • A right drainboard supports the intended workflow and footprint
  • Corner drain; 8-inch on-centre faucet holes; faucet sold separately
Buying Tips
Reduce ordering risk before checkout
Fit check: Width: 62.5 in • Depth: 26.5 in • Height: 44.5 in • Weight: 94 lb
For SI821-2R, measure the complete 62.5-inch footprint and confirm that the intended dirty-to-clean flow is supported by a right drainboard. Review the 2 18 x 21 in. bowls, each 14 in. deep, corner drain, backsplash clearance and leg location against your rough-in. Confirm 8-inch on-centre faucet holes; faucet sold separately. Confirm delivery access and have a qualified installer verify local plumbing and public-health requirements before purchase.
Specifications
Commercial Equipment Specifications — Built for Fast, Accurate Buyer Comparison.
Core Product Details
BrandEFI
ModelSI821-2R
CategoryWarewashing Faucets & Sinks
Equipment Type21″ Compartment Corner-Drain Sink
Installation TypeFreestanding; plumbed
Fit & Dimensions
Width62.5 in
Depth26.5 in
Height44.5 in
Overall Dimensions62.5″ W × 26.5″ D × 44.5″ H
Overall Dimensions (SI)62.5″ W × 26.5″ D × 44.5″ H
Net Weight94 lb
Performance & Output
Electrical / Gas Requirements
Drain Size1 7/8 in
Build & Certifications
CertificationsNSF Certified
Additional Specs
Faq answer 1Model SI821-2R is the 62.5-inch, two-compartment version with a right drainboard. Its working section uses 2 18 x 21 in. bowls, each 14 in. deep, so compare the complete footprint rather than bowl size alone.
Faq answer 2On SI821-2R, the right drainboard sits to the operator's right when facing the sink. Confirm that orientation against the room plan and the intended dirty-to-clean workflow.
Faq answer 3For SI821-2R, EFI's published family specifications list 18-gauge Type 304 stainless steel; 2 18 x 21 in. bowls, each 14 in. deep; corner drain; 8-inch on-centre faucet holes; faucet sold separately; coved corners and TIG-welded construction. Confirm the current specification sheet before finalizing faucet and drain connections.
Faq answer 4Before the SI821-2R order is approved, confirm its 62.5-inch overall width, right-side configuration, bowl clearance, faucet centres, drain location, delivery path and service aisle. Have the installer confirm supply, waste and faucet requirements, then compare the final layout with the applicable Canadian plumbing and public-health rules.
Faq question 1What is included in the EFI SI821-2R configuration?
Faq question 2Where is the working or drainboard side on SI821-2R?
Faq question 3What material, drain and faucet details apply to SI821-2R?
Faq question 4What should be confirmed before EFI SI821-2R is released for delivery?
Spec sheethttps://www.efifoodequip.com/upload/admin/users/21_Corner-Drain-Sink.pdf
FinishSatin finish
Material18-gauge Type 304 stainless steel
Buyer note: Ensure your space, connections, and access points match this unit before ordering. Our team can help confirm fit and requirements to prevent installation issues and delays.
Why Buy From Us
Before checkout, Continental Restaurant Equipment can work with your team to validate the quoted SKU before the unit is released for shipping, with special attention to SI821-2R's right-side working direction. As SI821-2R moves toward approval, Canadian pre-purchase support can help confirm bowl dimensions, drain location, faucet centres and drainboard orientation before the purchase is released.

Related Categories

Explore compatible equipment groups and closely related commercial categories.

All Stainless Steel Sinks2-Compartment SinksCommercial FaucetsPre-Rinse FaucetsCommercial Dishwashers

Frequently Asked Questions

What is included in the EFI SI821-2R configuration?
Model SI821-2R is the 62.5-inch, two-compartment version with a right drainboard. Its working section uses 2 18 x 21 in. bowls, each 14 in. deep, so compare the complete footprint rather than bowl size alone.
Where is the working or drainboard side on SI821-2R?
On SI821-2R, the right drainboard sits to the operator's right when facing the sink. Confirm that orientation against the room plan and the intended dirty-to-clean workflow.
What material, drain and faucet details apply to SI821-2R?
For SI821-2R, EFI's published family specifications list 18-gauge Type 304 stainless steel; 2 18 x 21 in. bowls, each 14 in. deep; corner drain; 8-inch on-centre faucet holes; faucet sold separately; coved corners and TIG-welded construction. Confirm the current specification sheet before finalizing faucet and drain connections.
What should be confirmed before EFI SI821-2R is released for delivery?
Before the SI821-2R order is approved, confirm its 62.5-inch overall width, right-side configuration, bowl clearance, faucet centres, drain location, delivery path and service aisle. Have the installer confirm supply, waste and faucet requirements, then compare the final layout with the applicable Canadian plumbing and public-health rules.