EFI SI824-1R – 50.5″ One-Compartment Corner-Drain Sink – Right Drainboard

EFI SI824-1R – 50.5″ One-Compartment Corner-Drain Sink – Right Drainboard

$873.75 $699.00
EFI
Add to WishlistCompare

Standard Features

  • 18-gauge Type 304 stainless-steel construction
  • Coved corners and die-stamped surfaces for drainage
  • TIG-welded construction with blended satin-finish seams
  • 1 sink compartment
  • Corner-drain guard, overflow pipe and drain extension included
  • 1 integral drainboard
  • NSF certified
  • Overall dimensions: 50.5″ W × 29.5″ D × 44.5″ H
Warranty Protection
1-Year Parts & Labor Warranty
CAShips From Canada
CACanadian Support (416) 783-5907
NSF Certified
NSF Certified
Commercial sanitation standard

Why Buy From Us

  • Authorized Commercial Equipment Supplier
  • Fast Shipping Across Canada
  • Support Beyond Checkout
Ask a Question
SKU: EFI SI824-1R
Availability: In Stock Pre order Out of stock
Warewashing Faucets & Sinks • Canada Commercial Sales

Commercial Product Overview

Best for restaurants needing reliable warewashing performance, sanitation confidence, and correct installation fit.
For a spec-first commercial kitchen purchase, the EFI SI824-1R is a 50.5-inch-wide corner-drain compartment sink in 18-gauge Type 304 stainless steel. This one-compartment model combines one 24 x 24 in. bowl, 14 in. deep, with a right drainboard. The result is a durable, easy-to-understand station that can be matched to your available wall run.

Buyers should verify the specifications on this page to confirm dimensions, requirements, and installation compatibility prior to ordering.

Specifications FAQ
Brand: EFIModel: SI824-1RCategory: Warewashing Faucets & Sinks
Commercial Grade Built for Daily Use Canada-Wide Sales
Spec-first confidence: verify fit, requirements, and compatibility before ordering.
Commercial intent: equipment listed for professional foodservice environments.
Ordering tip: match doorway/service access and confirm connections/clearances.
Sanitation Ready

Built for cleaner back-of-house workflow and commercial sanitation routines.

Water / Drain Fit

Drain: 1 7/8 in.

Service Workflow

Designed for dependable use in busy dish rooms and prep areas.

Commercial Build

Durable construction supports long-term professional foodservice use.

Key Specifications

Essential fit, capacity, utility, and certification details.

View all specifications
ModelSI824-1R
Fit CheckW 50.5 in × D 29.5 in × H 44.5 in
CertificationsNSF Certified
Key Benefits
Decision points for commercial buyers
  • 50.5-inch overall width and 1-compartment layout identified by model SI824-1R
  • 18-gauge Type 304 stainless steel selected for demanding commercial-kitchen use
  • One 24 x 24 in. bowl, 14 in. deep to support practical capacity planning
  • A right drainboard supports the intended workflow and footprint
  • Corner drain; 8-inch on-centre faucet holes; faucet sold separately
Buying Tips
Reduce ordering risk before checkout
Fit check: Width: 50.5 in • Depth: 29.5 in • Height: 44.5 in • Weight: 75 lb
For SI824-1R, measure the complete 50.5-inch footprint and confirm that the intended dirty-to-clean flow is supported by a right drainboard. Review the one 24 x 24 in. bowl, 14 in. deep, corner drain, backsplash clearance and leg location against your rough-in. Confirm 8-inch on-centre faucet holes; faucet sold separately. Confirm delivery access and have a qualified installer verify local plumbing and public-health requirements before purchase.
Specifications
Commercial Equipment Specifications — Built for Fast, Accurate Buyer Comparison.
Core Product Details
BrandEFI
ModelSI824-1R
CategoryWarewashing Faucets & Sinks
Equipment Type24″ Compartment Corner-Drain Sink
Installation TypeFreestanding; plumbed
Fit & Dimensions
Width50.5 in
Depth29.5 in
Height44.5 in
Overall Dimensions50.5″ W × 29.5″ D × 44.5″ H
Overall Dimensions (SI)50.5″ W × 29.5″ D × 44.5″ H
Net Weight75 lb
Performance & Output
Electrical / Gas Requirements
Drain Size1 7/8 in
Build & Certifications
CertificationsNSF Certified
Additional Specs
Faq answer 1Model SI824-1R is the 50.5-inch, one-compartment version with a right drainboard. Its working section uses one 24 x 24 in. bowl, 14 in. deep, so compare the complete footprint rather than bowl size alone.
Faq answer 2On SI824-1R, the right drainboard sits to the operator's right when facing the sink. Confirm that orientation against the room plan and the intended dirty-to-clean workflow.
Faq answer 3For SI824-1R, EFI's published family specifications list 18-gauge Type 304 stainless steel; one 24 x 24 in. bowl, 14 in. deep; corner drain; 8-inch on-centre faucet holes; faucet sold separately; coved corners and TIG-welded construction. Confirm the current specification sheet before finalizing faucet and drain connections.
Faq answer 4When planning for SI824-1R, verify its 50.5-inch overall width, right-side configuration, bowl clearance, faucet centres, drain location, delivery path and service aisle. The installer should review connections and service access while the local authority confirms the plumbing and sanitation requirements for the Canadian site.
Faq question 1What is included in the EFI SI824-1R configuration?
Faq question 2Where is the working or drainboard side on SI824-1R?
Faq question 3What material, drain and faucet details apply to SI824-1R?
Faq question 4Which final measurements matter when ordering EFI SI824-1R?
Spec sheethttps://www.efifoodequip.com/upload/admin/users/24_Corner-Drain-Sink.pdf
FinishSatin finish
Material18-gauge Type 304 stainless steel
Buyer note: Ensure your space, connections, and access points match this unit before ordering. Our team can help confirm fit and requirements to prevent installation issues and delays.
Why Buy From Us
Buy with a spec-first approach: Continental Restaurant Equipment can help you prepare a cleaner handoff to the plumber, installer or project manager, with special attention to SI824-1R's right-side working direction. For a Canadian SI824-1R installation, an additional specification review can help confirm bowl dimensions, drain location, faucet centres and drainboard orientation before the purchase is released.

Related Categories

Explore compatible equipment groups and closely related commercial categories.

All Stainless Steel Sinks1-Compartment SinksCommercial FaucetsPre-Rinse FaucetsCommercial Dishwashers

Frequently Asked Questions

What is included in the EFI SI824-1R configuration?
Model SI824-1R is the 50.5-inch, one-compartment version with a right drainboard. Its working section uses one 24 x 24 in. bowl, 14 in. deep, so compare the complete footprint rather than bowl size alone.
Where is the working or drainboard side on SI824-1R?
On SI824-1R, the right drainboard sits to the operator's right when facing the sink. Confirm that orientation against the room plan and the intended dirty-to-clean workflow.
What material, drain and faucet details apply to SI824-1R?
For SI824-1R, EFI's published family specifications list 18-gauge Type 304 stainless steel; one 24 x 24 in. bowl, 14 in. deep; corner drain; 8-inch on-centre faucet holes; faucet sold separately; coved corners and TIG-welded construction. Confirm the current specification sheet before finalizing faucet and drain connections.
Which final measurements matter when ordering EFI SI824-1R?
When planning for SI824-1R, verify its 50.5-inch overall width, right-side configuration, bowl clearance, faucet centres, drain location, delivery path and service aisle. The installer should review connections and service access while the local authority confirms the plumbing and sanitation requirements for the Canadian site.